Rear Power Window Lockout Operation (RPO A31 W/O AN3, DL3)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The rear window lockout function is operated from the driver master control through a command signal to the rear door power window switches. When the rear door power window switches receives an active lockout command, the rear door power window switches are disabled and the indicator lamp on the lockout switch will illuminate. Once disabled, the lockout feature will remain in effect until the ignition switch is cycled or the driver enables the rear windows by pressing the rear window lockout switch again.