LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1164 (Engine Mechanical - 3.6L (6 Of 6)) >> Off-Vehicle R EPAIR Instructions (4 Of 4) >> Drive Belt Tensioner Installation - Left Side

Drive Belt Tensioner Installation - Left Side

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Drive Belt Tensioner
    GM945826Courtesy of GENERAL MOTORS CORP.
  1. Place the left drive belt tensioner in position to the engine front cover.
  2. NOTE: Refer to Fastener Notice .
  3. Install the left drive belt tensioner bolt.

    Tighten:  Tighten the left drive belt tensioner bolt to 50 N.m (37 lb ft).