Crankshaft Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Crankshaft Sprocket Drive Pin

Courtesy of GENERAL MOTORS CORP.

If removed, install the crankshaft key. Lightly tap the key in place with a small soft face, bronze/plastic, hammer until it bottoms in the keyway.

Fig 2: View Of Crankshaft

Courtesy of GENERAL MOTORS CORP.

Gently lower the crankshaft into position in the cylinder block.