LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1163 (Engine Mechanical - 3.6L (5 Of 6)) >> Off-Vehicle Repair Instructions (3 Of 4) >> Camshaft Cover Assemble (LLT) >> Left Camshaft Cover

Left Camshaft Cover

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Left Spark Plug Shield Tube Seals, J 5590 & J-25254-A
    GM1992540Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW left spark plug shield tube seals using the J 5590  (1) and J-25254-A  (2). See Special Tools .
    2. Fig 2: View of Left Camshaft Cover Gasket Assembly
    GM1992532Courtesy of GENERAL MOTORS CORP.
  2. Install the NEW left camshaft cover gasket.
    3. Fig 3: View of Oil Filter Cap Assembly
    GM1992531Courtesy of GENERAL MOTORS CORP.
  3. Install the oil fill cap.
    4. Fig 4: View of Fuel Injector Sight Shield Cover Ballstud
    GM1992528Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Install the fuel injector sight shield cover ballstud.

    Tighten:  Tighten the fuel injector sight shield cover ball stud to 10 N.m (89 lb in).

    5. Fig 5: View of Left Camshaft Cover Bolt Grommets
    GM1992526Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.
  5. Install the NEW left camshaft cover bolt grommets.
scientia non olet · About LEMON Manuals