Chain, Sprockets, Oil Pump, and Input Shaft Removal
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Chain, Sprockets, Oil Pump, and Input Shaft Removal
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Front Output Shaft Drive Chain Assembly, Transfer Case Front Output Shaft Drive Sprocket, Transfer Case Front Output Shaft Driven Sprocket Tip: Note the orientation of the single blue link on the chain. The link should be facing upward. It is important to re-assemble the chain in the same orientation that it was found. |
| 2 | Transfer Case Front Output Shaft Drive Sprocket Thrust Washer |
| 3 | Transfer Case Front Output Shaft Drive Sprocket Bearing Assembly |
| 4 | Transfer Case Front Output Shaft Drive Sprocket Thrust Washer |
| 5 | Transfer Case Oil Pump Assembly Tip: Loosen the pump suction hose clamp bolt. |
| 6 | Transfer Case Input Shaft Assembly |
| 7 | Transfer Case Front Output Shaft Driven Sprocket Spacer |