LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1088 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Fascia Energy Absorber Replacement (BRT)

Front Bumper Fascia Energy Absorber Replacement (BRT)

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View of Front Bumper Assembly
GM1969046Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the front fascia. Refer to Front Bumper Fascia Replacement .
1 Front Bumper Fascia Energy Absorber Push Pin (Qty: 4)
2 Front Bumper Fascia Energy Absorber

Procedure

  1. Disconnect the electrical connectors/harnesses as needed.
  2. Transfer any parts as needed.
3 Front Bumper Fascia Energy Lower Absorber Push Pin (Qty: 2)
4 Front Bumper Fascia Energy Lower Absorber

Procedure

  1. Disconnect the electrical connectors/harnesses as needed.
  2. Transfer any parts as needed.
scientia non olet · About LEMON Manuals