LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Intake Manifold Removal - Left Side >> Removal

Intake Manifold Removal - Left Side: Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold (Left)
    GM1335932Courtesy of GENERAL MOTORS CORP.
  1. Remove the left intake manifold bolts. Do not forget to remove the bolt inside the intake manifold tube.
  2. Separate the intake manifold from the cylinder head using J 37228  . See Special Tools .
  3. Remove the left intake manifold.
scientia non olet · About LEMON Manuals