LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Crankshaft Balancer Cleaning and Inspection

Crankshaft Balancer Cleaning and Inspection

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Balancer Inspection Area
    GM1336127Courtesy of GENERAL MOTORS CORP.
  1. Clean the crankshaft balancer.
  2. Inspect the crankshaft balancer for damage to belt drive surface and to crankshaft balancer hub.
  3. Inspect the balancer hub groove for damage or wear.
  4. Replace the crankshaft balancer if any concerns exist.
scientia non olet · About LEMON Manuals