LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1037 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Control Valve Body Assemble >> Shift Valve Body Assemble

Shift Valve Body Assemble

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shift Solenoid Screen
    GM1581008Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Transmission Control Valve Body Overhaul Notice .
  1. Install the solenoid screen (1).

    Solenoid screen installed depth:  Ensure the solenoid screen (1) is installed to a depth of 0.50-1.00 mm (0.20-0.039 in) below the shift valve body surface, as shown in the insert, dimension A.

    2. Fig 2: Spring And Control Main Valve
    GM795173Courtesy of GENERAL MOTORS CORP.
  2. Install control main valve (1) and spring (2).
    3. Fig 3: Compressing Control Main Valve Spring
    GM795171Courtesy of GENERAL MOTORS CORP.
  3. Using J 43773  (2), compress the valve spring. See Special Tools .
  4. Install retaining clip (1). Ensure the retaining clip (1) is below the valve body surface.
    5. Fig 4: View Of Plug, Spring, And Shift Valve
    GM795170Courtesy of GENERAL MOTORS CORP.
  5. Install shift valve 2 (1), spring (2), and plug (3).
    6. Fig 5: Compressing Shift Valve Spring
    GM795169Courtesy of GENERAL MOTORS CORP.
  6. Using J 43773  (2), compress the valve spring. See Special Tools .
  7. Install retaining clip (1). Ensure the retaining clip is below the valve body surface.
    8. Fig 6: View Of Plug, Spring, And Shift Valve
    GM795166Courtesy of GENERAL MOTORS CORP.
  8. Install shift valve 3 (1), spring (2), and plug (3).
    9. Fig 7: Compressing Shift Valve Spring
    GM795164Courtesy of GENERAL MOTORS CORP.
  9. Using J 43773  (2), compress the valve spring. See Special Tools .
  10. Install retaining clip (1). Make sure the retaining clip is below the valve body surface.
    11. Fig 8: Spring And Shift Valve
    GM795163Courtesy of GENERAL MOTORS CORP.
  11. Install shift valve 1 (1), spring (2), and plug.
    12. Fig 9: Compressing Shift Solenoid Shift Valve Spring
    GM795162Courtesy of GENERAL MOTORS CORP.
  12. Using J 43773  (2), compress the valve spring. See Special Tools .
  13. Install retaining clip (1). Ensure the retaining clip is below the valve body surface.
scientia non olet · About LEMON Manuals