LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (3 Of 4) >> Off-Vehicle Repair Instructions (Part 2) >> Coolant Air Bleed Pipe Removal

Coolant Air Bleed Pipe Removal

  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with hose and seals (308).
    Fig 1: View Of Engine Coolant Air Bleed Pipe, Bolt & Gasket
    GM1277099Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312), covers (313), and seals (308).
    Fig 2: View Of Engine Coolant Air Bleed Cover, Gasket & Bolts
    GM1272806Courtesy of GENERAL MOTORS CORP.
  4. Remove the seals (308) from the pipe and covers.
    Fig 3: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  5. Discard the seals.
  6. Remove the hose (311) and clamps (310) from the pipe (307).
    Fig 4: View Of Engine Coolant Air Bleed Pipe, Hose & Clamps
    GM1277104Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals