LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Mark, sort, and organize all the components for assembly.
    Fig 1: Identifying Valve Rocker Arms
    GM480526Courtesy of GENERAL MOTORS CORP.
  1. Remove the rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Left  or Valve Rocker Arm Cover Replacement - Right .
  2. Remove the rocker arms.
    3. Fig 2: View Of Valve Rocker Arm Supports
    GM480527Courtesy of GENERAL MOTORS CORP.
  3. Remove the rocker arm supports.
    4. Fig 3: View Of Valve Pushrods
    GM480529Courtesy of GENERAL MOTORS CORP.
  4. Remove the pushrods.
  5. Clean and inspect the rocker arms and/or pushrods, if necessary. Refer to Valve Rocker Arm and Push Rods Cleaning and Inspection .
scientia non olet · About LEMON Manuals