LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Engine Mechanical - 6.6L - Off Vehicle Repair Instructions (1 Of 3)) >> Off-Vehicle Repair Instructions (Part 1) >> Engine Front Cover Removal

Engine Front Cover Removal

WARNING: This page is about a different variant/trim than selected.

Tools Required 

J 37228  Seal Cutter. See Special Tools .

  1. Remove the crankshaft position sensor bolt.
  2. Remove the crankshaft position sensor.
    Fig 1: View Of CKP Sensor & Bolt
    GM1336119Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine front cover bolts.
  4. Separate the engine front cover from the cylinder block using J 37228  . See Special Tools .
  5. Remove the engine front cover.
    Fig 2: View Of Engine Front Cover
    GM1336120Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals