Exhaust Outlet Installation

WARNING: This page is about a different variant/trim than selected.

Install the exhaust outlet.

Fig 1: View Of Exhaust Outlet & Pipe
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Install the exhaust outlet clamp.
Tighten: Tighten the exhaust outlet clamp to 15 N.m (11 lb ft).
Install the exhaust outlet to right exhaust pipe bracket bolt.
Tighten: Tighten the exhaust outlet to right exhaust pipe bracket bolt to 34 N.m (25 lb ft).

Fig 2: View Of Exhaust Outlet Heat Shield
Courtesy of GENERAL MOTORS CORP.
Install the exhaust outlet heat shield.
Install the exhaust outlet heat shield bolts.
Tighten: Tighten the exhaust outlet heat shield bolts to 10 N.m (89 lb in).