Exhaust Manifold Installation - Left

WARNING: This page is about a different variant/trim than selected.

Install the exhaust manifold gasket.
Install the exhaust manifold.

Fig 1: View Of Left Exhaust Manifold & Gasket
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Fig 2: Left Exhaust Manifold Torque Sequence (Removal Shown, Installation Is Reverse)

Courtesy of GENERAL MOTORS CORP.

Install the exhaust manifold bolts and nuts.
Tighten: Tighten the exhaust manifold bolts and nuts to 38 N.m (28 lb ft) in the proper sequence.
Install the exhaust manifold heat shield.

Fig 3: View Of Exhaust Manifold Heat Shield (Left)
Courtesy of GENERAL MOTORS CORP.
Install the exhaust manifold heat shield bolts.
Tighten: Tighten the exhaust manifold heat shield bolts to 10 N.m (89 lb in).