Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Install the air cleaner outlet resonator.

Fig 1: Installing Air Cleaner Outlet Resonator
Courtesy of GENERAL MOTORS CORP.
Align the hinge clip with the lip on the throttle body. Install the air cleaner outlet resonator to the throttle body by pivoting the resonator downward until the stud is through the hole in the resonator.

Fig 2: View Of Air Cleaner Outlet Duct
Courtesy of GENERAL MOTORS CORP.
Install the air cleaner outlet resonator wing nut.

Fig 3: View Of Air Cleaner Adapter Nut
Courtesy of GENERAL MOTORS CORP.
Install the air cleaner outlet resonator to the MAF/IAT sensor.

Fig 4: View Of Air Cleaner Outlet Duct Clamp
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
Tighten: Tighten the clamp to 4 N.m (35 lb in).