LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transmission - ALLISON - Introduction (2 Of 2)) >> Repair Instructions >> Torque Converter Housing Bolt Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the torque converter from the transmission. Refer to Torque Converter Replacement .
  2. Remove any of the 10 bolts (1), bolt heads shaded, where leakage at the bolt head is suspected.
    Fig 1: Torque Converter Housing Bolts
    GM659006Courtesy of GENERAL MOTORS CORP.
    3. IMPORTANT: Bolts (1) have a removable seal under the flanged head.
  3. Remove and discard seals from bolts removed.
scientia non olet · About LEMON Manuals