LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Crankshaft Rear Oil Seal Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

J 44641  Crankshaft Rear Oil Seal Remover. See Special Tools .

    Fig 1: Removing Crankshaft Rear Oil Seal Using J 44641
    GM660312Courtesy of GENERAL MOTORS CORP.
  1. Install the J 44641  to the crankshaft rear oil seal. See Special Tools .
  2. Remove the crankshaft rear oil seal using J 44641  . See Special Tools .
scientia non olet · About LEMON Manuals