Circuit/System Description
WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fuel is drawn from the fuel tank through the fuel heater, then to the fuel injection pump. Fuel temperature is monitored by the fuel temperature sensor, which is located in the fuel return line on the engine. The engine control module (ECM) supplies 5 volts and a ground circuit to the sensor. A fuel cooler located in front of the fuel tank is used to help keep the fuel temperature at an acceptable limit. When the ECM detects a fuel temperature above the pre-determined value, this diagnostic will fail, but will not turn the malfunction indicator lamp (MIL) ON.