Vehicle Speed Sensor Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Vehicle Speed Sensor & O-Ring

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement .
1	Vehicle Speed Sensor NOTE: Refer to Component Fastener Tightening Notice . Procedure: Disconnect vehicle speed sensor electrical connector. Tighten: 17 N.m (13 lb ft)
2	Vehicle Speed Sensor O-ring Procedure: Lightly lubricate the O-ring with clean DEXRON® VI.

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement .

Vehicle Speed Sensor

NOTE: Refer to Component Fastener Tightening Notice .

Procedure:
Disconnect vehicle speed sensor electrical connector.

Tighten: 17 N.m (13 lb ft)

Vehicle Speed Sensor O-ring
Procedure:
Lightly lubricate the O-ring with clean DEXRON® VI.