LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Door Lock Systems & Door Handles) >> Diagnostic Information & Procedures >> DTC B3130 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the BCM connector C7 and connect a test lamp from terminal 9 to ground.
  2. Ignition ON, verify that the test lamp does not illuminate.
    • If the test lamp illuminates test the door unlock control circuit for a short to voltage. If the circuit tests normal replace the IP fuse block.
  3. If the circuits test normal replace the BCM.