Suction Hose Replacement (LY2, LMF, L76 and L92)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Suction Hose Replacement (LY2, LMF, L76 and L92)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Recover the refrigerant. Refer to Refrigerant Recovery and Recharging . |
|
| 1 | Suction Hose Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | Suction Hose Nut Tighten: 9 N.m (80 lb in) |
| 3 | Sealing Washer Tip: Remove and discard sealing washer. Refer to Sealing Washer Replacement . |
| 4 | A/C Suction Hose |