Removal Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screw driver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Remove the upper HVAC module case (3) from the lower HVAC module case (10).
- Remove the air temperature separator plate (5) from the lower HVAC module case (10).
- Remove the left temperature door (11) from the lower HVAC module case (10).