LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Door System, Mirror System & Window System) >> Repair Instructions >> Contact Plate Replacement - Sliding Door Jamb >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rivets, that retain the contact plate (1) to the door jamb, using an appropriate drill and drill bit.
  2. Remove the contact plate (1) from the door jamb.
  3. Disconnect the electrical connector from the contact plate.
    Fig 1: Removing Sliding Door Jamb Contact Plate
    G02423156Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals