LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Seat System) >> Repair Instructions >> Seat Back Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back frame.
    Fig 1: Installing Rear Seat Back Frame
    G02423318Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the bolts that retain the seat back frame to the seat back hinges in the locations noted during disassembly.

    Tighten 

    Tighten the bolts to 30 N.m (22 lb ft).

  3. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear .
  4. Install the rear seat in the vehicle. Refer to Seat Replacement - Rear Bench .
    Fig 2: Installing Seat Back Frame To Seat Back Hinge Bolts
    G02423319Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals