Removal & Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect generator harness connector. Slide protective boot down revealing terminal stud. Remove battery output BAT terminal nut. Disconnect battery output BAT cable. Remove drive belt. Remove generator mounting bolts. Remove generator. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .