LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1862 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 4-5-6 Clutch Overhaul (6L80/6L90) >> 4-5-6 Clutch Plates Installation

4-5-6 Clutch Plates Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 4-5-6 Clutch Plates
GM1555341Courtesy of GENERAL MOTORS CORP.
4-5-6 Clutch Plates Installation

Callout Component Name
1 4-5-6 Clutch (Waved) Plate
2 4-5-6 Clutch Plate
  • 6L80 - Qty: 6
  • 6L90 - Qty: 7
3 4-5-6 Clutch Plate Assembly
  • 6L80 - Qty: 6
  • 6L90 - Qty: 7
4 4-5-6 Clutch Backing Plate
5 4-5-6 Clutch Backing Plate Retaining Ring
TIP:  After the retaining ring is installed, determine clutch piston travel in order to verify if the correct selective retaining ring is being used. Refer to 4-5-6 Clutch Backing Plate Retaining Ring Measurement .