LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1862 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 4-5-6 Clutch Overhaul (6L80/6L90) >> 4-5-6 Clutch Piston Removal

4-5-6 Clutch Piston Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 4-5-6 Clutch Piston
GM1555321Courtesy of GENERAL MOTORS CORP.
4-5-6 Clutch Piston Removal

Callout Component Name
1 4-5-6 Clutch Piston Dam Retaining Ring
CAUTION:

Use care when compressing the 4-5-6 clutch piston assembly, spring and dam assembly. Compressing the dam assembly too much may damage it.

CAUTION:

Refer to Retaining Ring Reuse Caution .


Special Tool 
J 43074  Clutch Spring Compressor
For equivalent regional tools, refer to Special Tools .
2 4-5-6 Clutch Piston Dam Assembly
TIP:  It may be necessary to apply air pressure to remove the dam and piston.
3 4-5-6 Clutch Spring
4 4-5-6 Clutch Piston Assembly
TIP:  It may be necessary to apply air pressure to remove the piston.