Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Reverse Input Clutch Front Bushing

Courtesy of GENERAL MOTORS CORP.

Using the J 25019-9 which is part of J 25019: bushing service set with the J 8092: driver handle, install a reverse input clutch front bushing (603).

Fig 2: Installing Reverse Input Clutch Rear Bushing

Courtesy of GENERAL MOTORS CORP.

Using the J 34196-3 which is part of kit J 34196-B: bushing service set with the J 8092: driver handle, install a reverse input clutch rear bushing (606).