LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1669 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L - Repair Instructions - On Vehicle) >> Camshaft Position Sensor Replacement (With Actuator)

Camshaft Position Sensor Replacement (With Actuator)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Camshaft Position Sensor (With Actuator)
GM2491396Courtesy of GENERAL MOTORS COMPANY
Camshaft Position Sensor Replacement (With Actuator)

Callout Component Name
Preliminary Procedures 
Remove the water pump. Refer to WATER PUMP REPLACEMENT (V8)
1 Camshaft Position Sensor Fastener (Qty: 3)
CAUTION:

Refer to FASTENER CAUTION .


Tighten 
12 N.m (106 lb in)
2 Camshaft Position Sensor
Procedure 
Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals