Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunroof Window & Retaining Screws

Courtesy of GENERAL MOTORS CORP.

Position the sunroof window (1) to the vehicle.
Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module assembly.

CAUTION: Refer to Fastener Caution .

Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment (Extended Cab) or Sunroof Window Height and Opening Fit Adjustment (Crew Cab) .
Tighten: Tighten the screws to 3 N.m (27 lb in).