Instrument Panel Driver Knee Bolster Deflector Replacement (Without RPO SLT)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the knee bolster assembly. Refer to Knee Bolster Replacement (With SLT) or Knee Bolster Replacement (Without SLT) . |
|
| 1 | Knee Bolster Deflector Nut (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 2 | Knee Bolster Deflector |