LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - On Vehicle >> Input Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Shaft Seal & Special Tool
    GM1728908Courtesy of GENERAL MOTORS CORP.
  1. Using the J 42738  , install the input shaft seal.
  2. Install the transfer case. Refer to Transfer Case Assembly Replacement .
scientia non olet · About LEMON Manuals