LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1397 (Engine Mechanical - 6.6L (1 Of 5)) >> Diagnostic Information and Procedures >> Engine Oil Level Sensor Diagnosis >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify proper engine oil level. Add oil as necessary.
  2. Ignition ON, observe the scan tool Engine Oil Level parameter. The reading should be OK and change to low when the oil level sensor/switch harness connector is disconnected.