LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection (With Dual Batteries) >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Battery Disconnect Warning .
NOTE: Clean any existing corrosion from the battery terminal and the battery cable end.
    Fig 1: View Of Battery Components
    GM1873941Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable (6) onto the battery negative post.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the negative battery cable nut (4) to 7.5 N.m (66 lb in).
  3. Close the negative battery cable post cover (3).
    4. Fig 2: View Of Negative Battery Cable & Components
    GM1873940Courtesy of GENERAL MOTORS CORP.
  4. Install the starter solenoid cable onto the battery negative post.
  5. Tighten the starter solenoid cable nut (1) to 5 N.m (44 lb in).
  6. Close the hood.
scientia non olet · About LEMON Manuals