LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Clutch Drive Plate Adjustment

Air Conditioning Clutch Drive Plate Adjustment

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Adjusting Air Conditioning Clutch Drive Plate
    GM2073711Courtesy of GENERAL MOTORS CORP.
  1. Install the clutch plate assembly.
    2. NOTE: Ensure the drive plate does not drag against the pulley when the pulley is rotated.
  2. Measure the air gap between the pulley and the drive plate. Adjust the shims to achieve a 0.35-0.65 mm (0.014-0.026 in) air gap.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the clutch plate retaining bolt and tighten to 18 N.m (13 lb ft).
scientia non olet · About LEMON Manuals