Hood Front Molding Replacement (GMC HD)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hood Front Molding (GMC HD)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Release the hood in order to access the front hood molding.
1	Hood Front Molding Locator Tab Tip: Position the locator tab first into the hood panel center hole followed by the remaining retainers.