Transmission Control Mount Plate Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Control Mount Plate Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front floor console transmission opening trim plate assembly. Refer to Front Floor Console Transmission Shift Opening Trim Plate Replacement (Automatic Transmission) or Front Floor Console Transmission Shift Opening Trim Plate Replacement (Manual Transmission) . Remove the front floor console assembly. Refer to Front Floor Console Replacement .
1	Manual Transmission Control Mount Plate Nut (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Manual Transmission Control Mount Plate Bolt (Qty: 4) Tighten: 9 N.m (80 lb in)
3	Manual Transmission Control Mount Plate Assembly