Radiator Surge Tank Inlet Hose/Pipe Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Surge Tank Inlet Hose/Pipe Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Drain the coolant. Refer to Cooling System Draining and Filling (GE 47716) or Cooling System Draining and Filling (Static Fill) . Remove front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .
1	Surge Tank Inlet Hose Clamp Procedure: Use J 38185 to reposition the surge tank inlet hose clamp. See Special Tools . Special Tools: J 38185 Hose Clamp Pliers. See Special Tools .
2	Radiator Bracket (Qty: 2)
3	Surge Tank Inlet Hose Clamp Procedure: Use J 38185 to reposition the surge tank inlet hose clamp. See Special Tools .
4	Surge Tank Inlet Hose Clip
5	Air Box Ribs
6	Air Box Clip
7	Surge Tank Inlet Hose Clamp Procedure: Use J 38185 to reposition the surge tank inlet hose clamp. See Special Tools .
8	Surge Tank Inlet Hose