Circuit/System Description
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
The body control module (BCM) controls voltage to the ignition lock cylinder actuator. When the gearshift is in PARK, the park position switch is closed. This grounds the circuit allowing the lock cylinder actuator to retract the pin. This allows the ignition lock cylinder to be turned to the LOCK position. When the gearshift is not in PARK, the park position switch is open, and the spring loaded pin is in the out position. This prevents the ignition lock cylinder from being turned to LOCK.