LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1105 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Lid Adjustment >> Front-to-Rear, Side-to-Side

Front-to-Rear, Side-to-Side

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Compartment Lid-To-Rear Compartment Lid Hinge Fasteners
    GM738149Courtesy of GENERAL MOTORS CORP.
  1. Loosen the fasteners securing the rear compartment lid to the rear compartment lid hinges.
  2. Align the rear compartment lid in order to achieve an equal 3 mm (1/8 mm) gap around the entire perimeter of the rear compartment lid.
  3. NOTE: Refer to Fastener Notice .
  4. Tighten the hinge fasteners.

    Tighten:  Tighten the hinge fasteners to 25 N.m (18 lb ft).