LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> O-Ring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure
  2. Remove the O-ring seal from the A/C refrigerant component.
  3. Inspect the O-ring seal for signs of damage to help determine the root cause of the failure.
  4. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
  5. IMPORTANT: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  6. Cap or tape the A/C refrigerant components.
  7. Fig 1: Identifying Proper Seating Of A/C Refrigerant O-Ring
    GM662315Courtesy of GENERAL MOTORS CORP.
  8. Discard the O-ring seal.