Heater and Air Conditioning Control Temperature Lever Replacement (Left Side)

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heater and Air Conditioning Control Temperature Lever Replacement (Left Side)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the left side I/P insulator. Refer to Instrument Panel Insulator Replacement - Left Side . Disconnect all the electrical connectors from components associated with the left air temperature actuator.
1	Left Air Temperature Actuator Screw (Qty: 2). NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Left Air Temperature Actuator.
3	Left Air Temperature Actuator Lever. Procedure: Reprogramming of the actuator may be necessary. Refer to Inflatable Restraint Sensing and Diagnostic Module Programming and Setup .