LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Compressor Clutch Plate/Hub Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Clutch Hub/Bearing Assembly
    GM1559905Courtesy of GENERAL MOTORS CORP.
  1. Install the clutch hub/bearing assembly (4).
  2. Install the clutch hub/bearing snap ring (3).
  3. Install the clutch plate assembly (2).
    4. NOTE: Refer to Fastener Notice .
  4. Install the clutch plate retaining bolt (1).

    Tighten:  Tighten the bolt to 18 N.m (13 lb ft).

  5. Install the engine belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement .
scientia non olet · About LEMON Manuals