LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1100 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Evaporator and Blower Module Drain Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rubber Adhesive Patch & Drain Tube
    GM756222Courtesy of GENERAL MOTORS CORP.
  1. Install the HVAC module drain tube to the HVAC module.
  2. Ensure that the drain tube is fully seated to the HVAC module.
  3. Snap drain fitting into the tunnel sheet metal.
  4. Close the flap on the tunnel insulator.
  5. Install the rubber adhesive patch (1) around the drain tube (2).
  6. Install insulation and carpet to original position.
scientia non olet · About LEMON Manuals