LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Cushion Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Cushion Replacement
    GM729840Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat cushion into the vehicle.
  2. Engage the center wire hook, on the back of the seat cushion, under the seat back frame.
  3. Position the rear seat buckles in the slots of the rear seat cushion.
  4. Push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
  5. Pull up on the front of the rear seat cushion to ensure that the cushion is secure.
scientia non olet · About LEMON Manuals