Rear Seat Back Cushion Frame Replacement (without AM9)

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Cushion Frame Replacement (without AM9)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat back. Refer to Rear Seat Back Replacement . Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (with AM9) or Rear Seat Back Cushion Cover and Pad Replacement (without AM9) or Rear Seat Back Cushion Cover and Pad Replacement (Side with AM9) .
1	Rear Seat Armrest Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 3 N.m (27 lb in)
2	Rear Seat Armrest Bolt (Qty: 4) Tighten: 9 N.m (80 lb in)
3	Rear Seat Armrest
4	Rear Seat Head Restraint Guides (Qty: 4)
5	Rear Seat Back Cushion Frame