Rear Side Door Garnish Molding Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Rear Side Door Garnish Molding Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
1	Garnish Molding Retainer (Qty: 2) Tip: Use a plastic flat-bladed tool to remove the push-in retainers from the door.
2	Rear Door Side Garnish Molding