LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Lighting Systems) >> Repair Instructions >> Headlamp Leveling Front Suspension Height Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View Of Front Headlamp Leveling Sensor Electrical Connector
    GM802719Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (1).
    4. Fig 2: View Of Ball & Socket
    GM802716Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the ball and socket (1) from upper control arm.
  5. Loosen the clinch nut (2) from the stud.
  6. Rotate and remove the sensor from the wheelhouse panel.
scientia non olet · About LEMON Manuals