LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Lighting Systems) >> Diagnostic Information and Procedures >> Courtesy Lamps Malfunction >> Circuit/System Testing >> Footwell Courtesy Lamp Malfunction

Footwell Courtesy Lamp Malfunction

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the footwell courtesy lamp.
  2. Ignition OFF, test for less than 1.0 ohm between the ground circuit terminal B and ground.
    • If greater than the specified range, test the ground for an open/high resistance.
  3. Connect a test lamp between the courtesy lamp supply voltage circuit terminal A and the ground circuit terminal B.
  4. Command the courtesy lamps ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the courtesy lamp supply voltage circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
    • If the test lamp is always ON, test the courtesy lamp supply voltage circuit for a short to voltage. If the circuit tests normal, replace the BCM.
  5. If all circuits test normal, replace the inoperative footwell courtesy lamp.
scientia non olet · About LEMON Manuals