Rear Bumper Fascia Reflector Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Fascia Reflector Assembly Rear Bumper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Raise the bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Rear Bumper Fascia Reflector Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Bumper Fascia Reflector